CASlink tools

Configuration tools for CAS CAN modules

Choose the tool for your module, or let this page find out which module is connected. Both tools run in Chrome or Edge and talk to the module over USB.

CX-700 · CAN-Bus module

CASlink

Outputs, inputs, conditions and scripts for the CX-700.

  • 6 outputs, 2 relays, 2 inputs
  • Click configuration or script per output
Open CASlink
GW-500 · CAN gateway

CASlink2

The gateway script for the GW-500: pass, block, change and send CAN frames between two buses.

  • CAN 1 and CAN 2, IN and OUT
  • One script window, live view
Open CASlink2

Detect connected module

Connect the module over USB, click Detect module and choose its port. The matching tool opens by itself.

GW‑500: DIP 4 OFF – with DIP 4 ON it starts in update mode and shows no port.
CX‑700: DIP 3 OFF – with DIP 3 ON it starts in update mode and shows no port.
In the tool, choose the port once more and click Open.